CONNECT with the CityUpdates Approved for Use - 2016 Standard Drawings
This site includes updates or new Standard Drawings in transition to the next edition of the City of San Diego Standard Drawings that have been approved for use. The inclusion of these drawings in the Contract Documents is the responsibility of the Engineer of Record either by reference or placing the details on the Plans where needed.
For the City Public Works construction contracts, the Engineer of Record must determine if the design is not substantially complete e.g., past 60% and has no significant budgetary implications. Otherwise, case by case review to assess the implications is necessary. When included in the Contract Documents, these drawings will control over the current edition of the City of San Diego Standard Drawings when a conflict arises.
G-20 Concrete Pavement Alley Section Width 53' to 69' (DELETED)- G-21 Concrete Pavement Alley Section Width 40' or Less (DELETED)
- SDE-104 Type E Modified Loop 082318.pdf
- SDE-105 Streetscape Pole Type P-A
- SDE-106 Streetscape Pole Type P-AP
- SDE-107 Streetscape Luminaire Type AP
- SDE-108 Streetscape Pole Type P-C
- SDE-109 Streetscape Pole Type P-CE/CL
- SDE-110 Streetscape Pole Type P-G
- SDE-111 Streetscape Pole Type P-T
- C-1 Masonry Retaining Wall Type 1 (Level Backfill)
- C-2 Masonry Retaining Wall Type 2 (Live Load Surcharge or Sloping Backfill)
- C-3 Masonry Retaining Wall Type 3 (Level Backfill)
- C-4 Masonry Retaining Wall Type 4 (Live Load Surcharge or Sloping Backfill)
- C-5 Masonry Retaining Wall Type 5 (Level Backfill)
- C-6 Masonry Retaining Wall Type 6 (Live Load Surcharge or Sloping Backfill)
- M-45.pdf
- SDG-106 Cold Milling Asphalt Concrete Overlay Types A and B 052318.pdf
- SDG-107 Trench Resurfacing for Asphalt Concrete Surfaced Streets.pdf
- SDG-117 Narrow Trench Resurfacing for Asphalt Concrete Surface Streets
- SDG-121 Concrete Pavement Alley Section
- SDG-123 24-Inch and Smaller Utility Pothole.pdf
- SDG-131 General Curb Ramp Notes 091118.pdf
- SDG-140 Protective Railing at Curb Ramps 091118.pdf
- SDG-162 Concrete Driveway for Confined Right Of Way.pdf
- SDG-165 Micro-Trench Backfill for Dry Utilities
- SDM-107_Dual_Height_Drinking_Fountain_070318.pdf
- SDM-112 Vinyl Coated Chain Link Fence.pdf
- SDRW-102_2 Inch Recycled Water Service Installation and Marking.pdf
- SDS-102 Sewer Lateral Cleanout (In Paved Alley or Other Areas Subject to Traffic)
- SDS-103 Sewer Lateral Cleanout on Sidewalk and Parkway 112017
- SDS-104 4 Inch Backwater Device.pdf
- SDS-105 House Connection Sewer Lateral.pdf
- SDS-110 Pipe Bedding and Trench Backfill for Sewers.pdf
- SDS-112 Concrete Encasement
- SDS-121 Sewer Main Cleanout.pdf
- SDSW-101 Cleanout For Underdrain 060518.pdf
- SDSW-102 Perforrated Underdrain Detail 060518.pdf
- SDSW-103 Bioretention Overflow Structure 060518.pdf
- SDSW-104 Vertical PVC Liner Attachment 060518.pdf
- SDW-112 Concrete Encasement For Water Mains
- SDW-116 Bonding Strap for Steel and SCRW Pipe (DELETED).pdf
- SDW 117 Air and Vacuum Valve Enclosure Location_082318.pdf
- SDW-120 Backflow Preventer Reduced Pressure Priniciple Detector Assembly for Fire Service 3in And Larger (DELETED)
- SDW-122 Joint Bonding of Non Welded Pipe Joints Fittings.pdf
- SDW-132 Post Mounted Cathodic Protection Warning Decal.pdf
- SDW-133 Symbols - Cathodic Protection (DELETED).pdf
- SDW-143 2 Inch Blowoff Installation.pdf
- SDW-144 4 Inch and 6 Inch Blow Off Installation Type A.pdf
- SDW-145 4 Inch and 6 Inch Blow Off Installation in Street Type B.pdf
- SDW-146 Blow Off Installation From End of Main and From Steel Main.pdf
- SDW-153 Gate Well Cap can Installation for Valves 4 Inches and Larger.pdf
- SDW-158 2 Inch Manual Air Valve.pdf
- SDW-159 1 or 2 Inch Automatic Combination Air Release Air Vacuum Valve Installations 082318.pdf
- SDW-160 4 Inch and 6 Inch Automatic Combination Air Release Air - Vacuum Valve Installations.pdf
- SDW-175 Butt Strap Connection Between SCRW WSP 20 Inch to 54 Inch Diameter Pipe 090718.pdf
- SDW-176 Wrapper Plate Line Stop Outlet for 20 Inch to 54 Inch SCRW Pipe 090718.pdf
- SDW-177 Outlet and Collar Plate Detail for SCRW Pipe 20 Inch to 54 Inch Diameter 090718.pdf